Tel: +86 155 8732 0008 E-mail: luyi1@luyiauto.com
Local Howo Truck Supplier in Tanzania

LUYI 3 axle 13.6 meter coil flatbed semi trailer Q345 steel frame 12R22.5 tire steel coil transport trailer

9500 USD


  • Axle: 3
  • Load: 60 TON
  • Brand Name: LUYI

Product Details

Product Tags

The LUYI 13.6-meter steel coil special flatbed semi-trailer is equipped with a platform that has anti-rolling grooves pre-installed according to the rolling direction of the steel coil. The width and depth of the grooves are designed in grades based on the common coil diameters. Once a coil falls into the groove, it will automatically be positioned. There is no need to repeatedly adjust the position during loading. It is combined with a 1.5-meter detachable reinforced column and a multi-point binding winch. This 13.6-meter steel coil special flatbed semi-trailer is manufactured in accordance with the external dimensions limit of GB1589 and the safety conditions of JT/T 1178.2. The main beam is made of Q345 high-strength steel and is equipped with three heavy-duty axles. It runs very stably on the steel transportation lines in Central Asia and Southeast Asia.

³һ����ҳ_01.jpg

Core Strengths
The positioning of steel coils is not dependent on human effort. The grooves are arranged in sections according to the coil diameter, and steel coils with diameters ranging from 1.2 meters to 1.8 meters will automatically be limited after falling into the grooves. The loading and alignment time has been compressed from 15 minutes to about 5 minutes.

The main beam has sufficient bending reserve. The lower flange is 16mm thick and the web is 10mm thick. The cross-section of the main beam is calculated based on a 60-ton full-load condition. After 100,000 fatigue loading tests, there is no permanent deformation, and the heavy steel coils can be lifted without sagging for a long time.
The column disassembly is time-saving. The 1500mm reinforced column is of a plug-in type structure. With the cooperation of two people, it takes about 2 minutes to disassemble a single column. The guardrail and the column can be adjusted at any time according to the shape of the goods.
The density of binding points is high. The distance between the winches and the pull rings on both sides of the platform is 1.2 meters, which is about 40% more than that of the conventional flatbed. The steel coils and wire rods can be bound in multiple directions crosswise, and they will not shift during transportation.
The anti-corrosion process is suitable for maritime and coastal conditions. After the entire vehicle is shot-primed and then electrostatically painted with double-layer primer and topcoat, the film thickness is not less than 80 microns. After the salt spray test for 480 hours, there is no blistering, and the paint will not flake off after maritime transportation.

³һ����ҳ_02.jpg

³һ����ҳ_03.jpg

³һ����ҳ_04.jpg

³һ����ҳ_05.jpg


Qualification Certification
The company holds the qualification for production of special vehicles approved by the Ministry of Industry and Information Technology. It has passed the ISO9001 quality management system certification. The semi-trailer products have the CCC compulsory certification. For the export side, it can provide CE certification, Kenyan PVOC, Nigerian SONCAP, origin certificate and third-party inspection reports. The supporting components use mature brands such as 12R22.5 all-steel tires, 3M reflective markers, and high-strength binding winches. The batches can be traced.

³һ����ҳ_10.jpg

Customer feedback
Tanzanian customers use this 13.6-meter steel coil-specific flatbed semi-trailer to run the route from Dar es Salaam to inland steel mills. Each trip loads 4 coils of cold-rolled steel, and the platform remains flat without any dents or deformations for 13 consecutive months. Zambian customers add extended columns to transport wire rods, with multiple binding points and quick loading/unloading. The driver reported that each trip took 20 minutes less.

³һ����ҳ_07.jpg

Packaging Logistics
This model is mainly transported by bulk cargo ships and roll-on/roll-off vessels. When loading onto the bulk cargo ship, the frame is padded with wooden planks and cross-bonded with four-point steel wires. Before leaving the factory, it is sprayed with marine rust-proof wax. The columns and winches are packed separately and sent along with the vehicle. On the roll-on/roll-off vessel, the entire vehicle is driven into the ship's hold and picked up directly upon arrival at the port. Large orders can be disassembled and packed into 40-foot high containers, with 2 pieces of components per container. The freight cost significantly decreases. The entire loading process can be supervised by a third party and photos and videos of reinforcement can be taken. A packing list, binding plan, and complete export documents are provided to comply with the reinforcement specifications for heavy vehicles during maritime transportation.

³һ����ҳ_08.jpg

Regarding us
Shandong luyi dedicated vehicle manufacturing co., ltd. It is a specialized vehicle manufacturing enterprise listed in the announcement of the Ministry of Industry and Information Technology. With over 20 years of experience in the research and manufacturing of semi-trailers, it has established a complete system covering design, research and development, production and sales. Its products have been exported to more than 80 countries. Tanzania, Zambia, Uganda and Vietnam are long-term cooperative markets.
The factory is equipped with an automatic cutting line and submerged arc welding production line. Key weld seams are rechecked on each vehicle, and the spraying process is double primer and topcoat. It supports adjusting the wheelbase, slot position and column height according to the regulations of the destination countries. The entire vehicle supports OEM customization and logo, color customization. The vehicle is covered by a 6-year warranty. After the warranty period, technical support and free spare parts replacement will continue to be provided. The response time for after-sales issues is 48 hours. It supports arranging the shipment after third-party inspection by SGS, TÜV, etc.

³һ����ҳ_09.jpg


Leave Your Message


Write your message here and send it to us

Leave Your Message