LUYI three axle lowbed semi trailer reinforced gooseneck low bed trailer with anti skid plate for oversized cargo hauling
The LUYI three-axle low-platform semi-trailer features a 17.5-meter swivel cargo platform equipped with full airbag suspension. The working height of the cargo platform can be adjusted. Construction machinery such as excavators and loaders can directly enter and exit the vehicle without using a scaffold. The preparation time for installing one piece of equipment has been reduced from nearly 1 hour to around 20 minutes. This three-axle low-platform semi-trailer is designed in accordance with GB1589 and JT/T 1178.2 standards. The main beam is made of high-strength steel and welded as a whole. The platform surface is covered with anti-slip patterned steel plates and has multiple binding positions. It can handle three scenarios: port transfer, equipment allocation in mining areas, and large-scale logistics.

Core Strengths
The loading and unloading process is highly efficient. The swivel lower cargo platform keeps the slope angle within 11 degrees, allowing excavators and road rollers to drive directly in. The preparation time for loading a single piece of equipment is shortened by approximately 40 minutes.
Airbag suspension protects both the cargo and the road. The airbag can adjust the height of the cargo platform by about 150mm, reducing shock during passing through uneven sections, significantly lowering the peak acceleration of precision equipment transportation, and causing less damage to the road surface during long-distance trunk routes.
The main beam has sufficient torsional strength. The 18mm lower flange is paired with a 10mm web plate. The main beam is calculated based on a 60-ton full-load condition and has no permanent deformation after 100,000 fatigue loading tests. It does not collapse under long-term heavy machinery pulling.
The binding and fixation are more secure. The spacing between the two sides of the binding position is 1.2 meters, which is about 35% more than that of the conventional low flatbed. Chains and tensioners can be fixed in multiple directions, and the equipment does not shift during transportation.
Corrosion-resistant and suitable for maritime transportation. After shot blasting for rust removal and spraying epoxy primer and polyurethane topcoat, the film thickness is not less than 85 micrometers. There is no blistering after 480 hours of salt spray test, and the equipment does not peel off or rust during maritime transportation to the port.




Qualification Certification
The company holds the qualification for production of special vehicles approved by the Ministry of Industry and Information Technology. It has passed the ISO9001 quality management system certification. The semi-trailer products have the CCC compulsory certification. For the export side, it can issue CE certification, Kenyan PVOC, Nigerian SONCAP, origin certificates and third-party inspection reports. The supporting components use 12R22.5 all-steel tires, first-line brands of airbags and valves, and 3M reflective signs. Each batch can be traced. The factory inspection is carried out by third-party institutions such as CCIC and TÜV Rheinland, and they issue reports on dimensions, load capacity and braking performance, which can be directly used for customs clearance at the destination port.

Customer feedback
Kenyan customers use this three-axis low flatbed semi-trailer to transport excavators at the Mombasa Port. The airbag suspension lowers the platform automatically during unloading, and the equipment drives off by itself. The single-piece transfer time is controlled within half an hour. Zambian mining customers use it for the transfer of mining truck accessories and loading equipment. The main beam has no deformation after continuous operation for one year. Customers from Uganda and Vietnam have reported that the customs clearance procedures upon arrival at the port are completed in one go, and they can immediately pair with a tractor and put it into use upon landing. The chat records of overseas customers, real-time vehicle pickup photos, and loading videos can all be provided for verification.


Packaging Logistics
This model is mainly transported by bulk cargo ships and roll-on/roll-off ships. When loading on the bulk cargo ships, the frame is padded with wooden planks and cross-bonded with four-point steel wires. Before leaving the factory, it is sprayed with marine rust prevention wax, and the airbags and lamps are separately protected. When the entire vehicle enters the ship's hold on the roll-on/roll-off ships, it is directly picked up upon arrival at the port. Large orders can be disassembled into individual parts and packed in 40-foot high containers, with each container holding 2 sets of loose parts. The freight cost is significantly reduced. The entire loading process can be supervised by a third party, and photos of reinforcement, binding videos, and complete export documents can be provided, which comply with the reinforcement specifications for heavy vehicles during maritime transportation.

Regarding us
Shandong luyi dedicated vehicle manufacturing co., ltd. It is a specialized vehicle manufacturing enterprise listed in the announcement of the Ministry of Industry and Information Technology. With over 20 years of experience in the research and manufacturing of semi-trailers, it has established a complete system covering design, research and development, production and sales. Its products have been exported to more than 80 countries. Tanzania, Zambia, Uganda and Vietnam are long-term cooperative markets. The factory is equipped with an automatic cutting line and submerged arc welding production line. Key weld seams are rechecked on each vehicle, and the spraying process adopts double primer and topcoat. It supports adjusting the wheelbase, cargo platform length and width according to the regulations of the destination country. The entire vehicle can be customized as OEM and customized with logos and colors. The vehicle is covered by a 6-year warranty. After the warranty period, technical support and free parts replacement will continue to be provided. After-sales issues will be responded to within 48 hours. It supports third-party inspection by SGS and TÜV before arranging the shipment.








